Features & Specs
Features
- 12,000 lbs. Lift Capacity
- 3-Stage Arms Enable A Wide Range Of Symmetric Lifting That Includes Vehicles From Heavy-Duty Trucks To Small Passenger Sedans, Within Rated Capacity
- Single Point Mechanical Lock Release Allows Technician To Disengage Both Columns Simultaneously
- Heavy-Duty Polyurethane Screw Pads Accommodate A Wide Range Of Recommended Lifting Points
- Adjustable Column Height Accommodates Higher Profile Vehicles And Provides Maximum Headroom To Work Underneath Vehicles
- Padded Overhead Shut Off System Prevents Vehicle Damage
- Powder Coat Finish Provides Long-Lasting Durability
- Plated Arm Restraints And Arm Pins Inhibit Rust And Provide Long-Lasting Durability
- Standard Dual Integrated Rubber Door Guards Help Protect Vehicle Panels From Inadvertent Damage
- ALI/ETL Certified
Site Requirements
- Minimum Height: 14'
- Recommended Width: 14'
- Recommended Depth: 24'
- Electrical: 208-230V 1Ph 20A
- Concrete Specs: 4" Thick, Reinforced, Free From Cracks & Seams, Rated at 3500+PSI & Cured Minimum of 28 Days
Specifications
| Model |
LE12-3S |
LE12-3S with 2" Extension |
| Lifting Capacity: |
12,000 lbs. |
12,000 lbs. |
| Front Arms: |
3-Stage |
3-Stage |
| Rear Arms: |
3-Stage |
3-Stage |
| Lifting Configuration: |
Symmetric |
Symmetric |
| Rise Height (Screwpads Highest): |
77-3/4" (1,975mm) |
77-3/4" (1,975mm) |
| Overall Height: |
13' 10" or 14' 7"
(4,216 or 4,445mm) |
15' 10" or 16' 7"
(4,826 or 5,055mm) |
| Overall Width: |
139-3/4" (3,550mm) |
139-3/4" (3,550mm) |
| Drive-Thru Clearance: |
103" (2,616mm) |
103" (2,616mm) |
| Floor to Overhead Switch: |
13' 3-1/2" or 14' 1/2"
(4,051 or 4,280mm) |
15' 3-1/2" or 16' 1/2"
(4,661 or 4,890mm) |
| Minimum Arm Reach: |
27-1/2" 699mm) |
27-1/2" 699mm) |
| Maximum Arm Reach: |
54-1/2" (1,386mm) |
54-1/2" (1,386mm) |
| Screw Pad Height: |
5-1/4" - 6-3/4"
(133 - 171mm) |
5-1/4" - 6-3/4"
(133 - 171mm) |
| Inside of Columns: |
115" (2,921mm) |
115" (2,921mm) |
| Ceiling Height Required: |
167" or 176"
(4,242 or 4,470mm) |
191" or 200"
(4,852 or 4,890mm) |
| Motor: |
3HP 1PH 60Hz |
3HP 1PH 60Hz |
| Voltage: |
208-230V |
208-230V |
| Speed of Rise: |
61 Seconds |
61 Seconds |
| Max Load Per Arm: |
3,000 lbs. (1,360kg) |
3,000 lbs. (1,360kg) |
| ALI/ETL Certified: |
Yes |
Yes |
| Colors Available: |
Red, Blue |
Red, Blue |
| Shipping Dimensions: |
132" L x 26" W x 34" H |
132" L x 26" W x 34" H |
| Shipping Weight: |
2,045 lbs. |
2,045 lbs. |
* Lift capacity ratings are based on loads equally distributed on all four arms.
** Lifting and lowering speeds may vary depending on the weight of the vehicle.
- Warranty: (5) Years on Structure, (2) Years on Functional Parts, (1) Year Labor
Challenger Lifts Warranty Statement
Challenger Lifts, Inc. (CLI) lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for all reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI's specifications set forth in CLI's installation, operation, and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and in not transferable. This warranty is valid only if the product has been registered with Challenger lifts.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are considered the power units, cylinders, sheaves, sheave pins, hoses, hydraulic & pneumatic fittings, cables, adapters, latched, valves, and controls.
Structural parts are considered the carriage, columns, column extensions, overhead beams, arms, cross beams, runways, wheel stops, ramps, bolsters., sync rails, and plungers.
Note: Warranty registration must be completed online at challengerlifts.com/register-your-lift or warranty period will begin from invoice date of lift purchase.
