Sunex Tools

Sunex 1410 10 Ton High Height Pin Type Jack Stands Pair The Sunex Tools 1410 10 Ton High Height Pin Type Jack Stands Pair are support 20,000 lbs. each and are sold as a pair. These tall jack stands can be used for supporting trucks, trailers, and equipment in fleet garages, agricultural, industrial and construction environments. Four leg steel base and support tube are made of heavy schedule pipe for added strength and stability. Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy. Height adjustment pin is attached to stand to prevent loss. Large saddle with locating lugs support and position vehicle frame.

Sunex 5222 Folding Dual Pump 2 Ton Engine Crane The Sunex Tools 5222 Folding Dual Pump 2 Ton Engine Crane features reaches max height 25% faster than single pump designed engine cranes. It's low profile legs are designed to fit under a wide range of vehicle frames including sports cars. Four boom positions adjust for optimal reach based on required capacity. Drop forged steel hook swivels 36° for ease of use and safety during operations, while chainless design eliminates sway during lifting. Space saving design folds to conveniently store away in small footprint.

Sunex 5712 12-Ton Manual Hydraulic Shop Press The Sunex Tools 5712 12 Ton Manual Hydraulic Shop Press features a fully welded design for superior durability and strength. Includes a 3-piece punch kit, bed plates, and bearing shield. The 5712 is ideal for straightening, bending, and removing/installing gears, bearings and bushings.

Sunex 5720 20-Ton Manual Hydraulic Shop Press The Sunex Tools 5720 20 Ton Manual Hydraulic Shop Press features a fully welded design for superior durability and strength. Includes a 3-piece punch kit, bed plates, and bearing shield. The 5720 is ideal for straightening, bending, and removing/installing gears, bearings and bushings.

Sunex 5720 20-Ton Manual Hydraulic Shop Press The Sunex Tools 5720 20 Ton Manual Hydraulic Shop Press features a fully welded design for superior durability and strength. Includes a 3-piece punch kit, bed plates, and bearing shield. The 5720 is ideal for straightening, bending, and removing/installing gears, bearings and bushings.

Sunex 5750 50-Ton Manual Hydraulic Shop Press The Sunex Tools 5750 50 Ton Manual Hydraulic Shop Press features a fully welded design for superior durability and strength. Includes a shock-absorbent glycerin gauge, 3-piece punch kit, bed plates, and bearing shield. The 5750 is ideal for straightening, bending, and removing/installing gears, bearings and bushings. The sliding head allows for offset pressing providing more room on one side if needed when pressing irregular objects.

Sunex 6603ASJ 3 Ton Aluminum Service Jack The Sunex Tools 6603ASJ 3 Ton Aluminum Service Jack is the big-brother to the market-leading 2 Ton 6602ASJ. The 6603ASJ features full aluminum body construction and a RapidRise hydraulic power unit with dual pump pistons that reaches max height in only 7.5 pumps of the conveniently stored two-piece 50" handle with quick-lock feature. Side mounted handles, ball bearing mounted rear swivel caster wheels and wide track front wheels allow easy maneuvering and jack positioning. Overload and bypass safety valves protect the jack from overload and over extension while wiper seals protect the hydraulic system from contaminants. Rubber saddle pad and foam bumper handle protect the vehicle.

Sunex 6603ASJ 3 Ton Aluminum Service Jack The Sunex Tools 6603ASJ 3 Ton Aluminum Service Jack is the big-brother to the market-leading 2 Ton 6602ASJ. The 6603ASJ features full aluminum body construction and a RapidRise hydraulic power unit with dual pump pistons that reaches max height in only 7.5 pumps of the conveniently stored two-piece 50" handle with quick-lock feature. Side mounted handles, ball bearing mounted rear swivel caster wheels and wide track front wheels allow easy maneuvering and jack positioning. Overload and bypass safety valves protect the jack from overload and over extension while wiper seals protect the hydraulic system from contaminants. Rubber saddle pad and foam bumper handle protect the vehicle.

Sunex 6604 Heavy-Duty 5 Ton Floor Jack The Sunex Tools 6604 Heavy-Duty 5 Ton Floor Jack is a heavy duty service jack designed for continuous, dependable performance in fleet truck shops, farm equipment dealers, bus company garages and commercial vehicle service bays. The wiper seals protect the hydraulic system from dirt and grime while the flash-chromed ram and pump piston inhibit rust. Full swivel ball bearing caster wheels with zerk grease fitting. Front wheels include roller bearings. Rear kick plate helps turn jack when in tight places.

Sunex 6635 Two Stage 22-35 Ton Air Truck Jack The Sunex Tools 6635 Two Stage 22-35 Ton Air Truck Jack features a self-retracting two stage ram with 35 tons capacity at first stage and 22 tons capacity at second stage. The contoured chassis base allows wheels to contact ground when not under load while raising the wheels off the ground when under load to prevent damage to vehicle. The narrow chassis fits easily between tandem wheels and the large 8" diameter wheels allow it to move maneuvered around the shop or garage easily. The two-piece handle has 3 locking positions for easy positioning under the vehicle. The 6635 has a safety overload bypass valve and wiper seals to protect the hydraulic system from contaminants.

Sunex 7752C Low-Profile Transmission Jack 1.5 Ton 3,000 lbs. Capacity with Adjustable Saddle The Sunex Tools 7752C Low-Profile Transmission Jack allows a single technician to remove, move, or install heavy truck transmissions. The wide chassis distributes the load safely and keeps the transmission stable. The universal saddle bracket is adjustable in four directions of tilt that allows for easy positioning of the transmission. Overload and bypass safety valves prevent overload of the jack and over extension of the ram. Pump handle rotates 360° for operation from any direction and the release valve allows for slow controlled lowering.

Sunex 7790 Clutch Jack 300 lbs. Capacity The Sunex Tools 7790 Clutch Jack features a 300 lbs. capacity and it's 24" wide width ensures stability while in use. The swivel saddle tilts 90° and also swivels full circle to safely align clutch during installation and clear undercarriage during removal. The handle rotates 360° allowing operation from any position while the shorter 20" handle length avoids contact with vehicle undercarriage. Includes both 2" x 10" and 1.75" x 10" spline shafts with side chassis holster.

Sunex 7793B Telescoping Manual Transmission Jack 1,000 lbs. Capacity Under Hoist Foot Activated with Adjustable Saddle The Sunex Tools 7793B Telescoping Manual Transmission Jack allows a single technician to remove, move, or install heavy transmissions and transfer cases for vehicles on a lift. The wide chassis distributes the load safely and keeps the load stable. The universal saddle bracket is adjustable in four directions of tilt that allows for easy positioning of the load. The low lift height allows for easy transfer to workbench and the max lift height accommodates all technicians.

Sunex 7796 Telescoping Air Hydraulic Transmission Jack 1,000 lbs. Capacity Under Hoist with Adjustable Saddle The Sunex Tools 7796 Telescoping Air Hydraulic Transmission Jack allows a single technician to remove, move, or install heavy transmissions and transfer cases for vehicles on a lift. The wide chassis distributes the load safely and keeps the load stable. The universal saddle bracket is adjustable in four directions of tilt that allows for easy positioning of the load. The low lift height allows for easy transfer to workbench and the max lift height accommodates all technicians. 

Sunex 8035 Compact Slide Top Utility Cart Heavy-Duty 450 lbs. Load Capacity with Flip Top Locking Lid The Sunex Tools 8035 Compact Slide Top Utility Cart features 18 gauge steel construction, 450 lbs. load capacity, durable powder coat finish with chrome handles, slide top locking top bin, and four heavy-duty 5" x 2" with 2 locking and 2 fixed swivel casters. In an effort to meet the growing demand among technicians for a compact utility cart able to be maneuvered in the confined spaces common in smaller garages and service bays, the Sunex 8035 series is just the right mix of storage space and maneuverability. It's rugged construction provides a rated capacity of 450 pounds and enough tool storage space to accommodate the tools to complete any job. The 8035 is available in 2 colors: Red with Chrome Accents, and Black with Chrome Accents.

Sunex 8045 Professional 5-Drawer Service Cart Heavy-Duty 500 lbs. Load Capacity with Flip Top Locking Lid The Sunex Tools 8045 Professional 5-Drawer Service Cart features 16 gauge steel construction, 500 lbs. load capacity, durable powder coat finish with chrome handles, flip top locking top bin, and four heavy-duty 5" x 2" with 2 locking and 2 fixed swivel casters. Tool cart ships 75% assembled. Drawers ship preassembled and keyed the same, making the 8045 one of the easiest and quickest assembled carts in the market. The 8045 is available in 3 colors: Red with Chrome Accents, Black with Chrome Accents, and Blue with Chrome Accents.

Sunex 8057BK Professional 6-Drawer Tool Cart Full Extension Drawers and Locking Top Bin in Black The Sunex Tools 8057BK Professional 6-Drawer Tool Cart features 18 gauge steel construction, 500 lbs. load capacity, gas shocks, locking top bin, ergonomic push handle, and four heavy-duty 5" x 2", 2 locking swivel casters. Drawers are full extension with roller bearing drawer slides. Tool cart ships fully assembled.