APEX 48" Lightweight Foam Garage Ramp Kit

Description

APEX 48" Lightweight Foam Garage Ramp Kit
6" Height / 9.5° Approach Angle / Set of 2

The APEX 48" Lightweight Foam Garage Ramp Kit gives low cars serious working room without needing a full lift. Each 48 inch ramp delivers 6 inches of stable lift with a 9.5 degree approach angle tuned for performance cars, mild drops, and factory sport suspensions. A solid structural foam core keeps weight down but feels rock solid under the tires, while a rugged textured coating grips floors and tread. You drive on once, set the brake, and finally have enough space to actually work under the car.

APEX Garage Ramps For Low And Performance Cars
APEX garage ramps turn a normal garage floor into a place you can actually work. Built from high density structural foam with a textured, non marring coating, these ramps give low and performance cars real lift without sketchy angles or cheap plastic flex. From compact 36 inch ramps for quick oil changes to long 72 inch ramps that get you close to lift like access, every model is tuned around approach angle, stability, and everyday use. You drive on once, set the brake, and finally have room to see, reach, and wrench.

Real Working Height For Real Cars
If you are tired of doing oil changes and underbody work with your shoulders pinned to the floor, the 48" Lightweight Foam Garage Ramp Kit from APEX is the step up you have been waiting for. With 6 inches of lift and a 9.5 degree approach angle, this garage ramp kit gives low cars and performance vehicles real room to breathe in a standard garage.

Instead of crawling under a car sitting barely off the concrete, you roll up onto a pair of solid APEX ramps that are built for the job. That extra height makes a big difference when you are reaching for drain plugs, undertrays, exhaust hangers, or suspension hardware. You see more, you reach more, and you fight the car a lot less.

Tuned For Low And Sporty, Not Just SUVs
Most universal ramps are designed around trucks and SUVs, which is why they feel too steep and too short the moment you lower anything. The APEX 48" Lightweight Foam Garage Ramp Kit is tuned the other way around. The 48 inch length and 9.5 degree approach angle are built to work with performance coupes, sedans, and mildly lowered street cars that actually care about bumper clearance.

The car climbs gradually as you roll forward, instead of pivoting hard right at the front edge of the ramp. That smoother transition helps protect lips, splitters, and long overhangs that would normally scrape their way up a traditional plastic ramp. If you have avoided ramps because your car was too low, this is the kit that gets you back in the game.

APEX Structural Foam Core That Means Business
At the center of every APEX garage ramp is a high density structural foam core. This is not hollow plastic or blow molded novelty gear. It is a solid body that spreads load across the full footprint of the ramp, so you do not get hot spots where the material crushes or caves in under the tire.

Under load it feels planted, not flimsy. You do not hear panels popping or feel the ramp flexing every time you move a few inches. The core resists permanent compression over time, which means the 6 inches of lift you buy is the 6 inches of lift you keep. For people who wrench often, that kind of consistency matters.

Tough, Textured Coating That Stays Put
APEX encapsulates the structural foam core in a rugged, textured coating that is built for real garage life. It helps shield the ramp from abrasion, impacts, oil, and common chemicals, and it provides a micro textured surface that grips both floor and tire.

On bare concrete, epoxy coated floors, or typical shop surfaces, the ramps are designed to stay where you put them. You roll up, the tread bites, and the ramp does its job without sliding forward or skittering across the floor. No rubber mats, no creative bracing, just a surface that behaves the way you expect a professional ramp to behave.

6 Inches Of Lift Without Turning Your Garage Into A Warehouse
The 48" Lightweight Foam Garage Ramp Kit from APEX ramps hits a sweet spot between height and storage. Six inches of lift is enough to make underbody work feel reasonable without pushing the car into sketchy territory or requiring huge run-up space.

At 48 inches long, each ramp still stores easily against a wall, under a workbench, or in a trailer. You are not committing half your garage to a set of ramps, and you are not dragging heavy steel contraptions around just to knock out a simple service job. Lightweight structural foam keeps each ramp surprisingly easy to carry and reposition.

Safer And Smarter Than The Usual Workarounds
Most people start with three solutions in a home garage: a basic floor jack and stands, questionable plastic ramps, or a stack of lumber cutoffs. All three can work. All three can also turn into a problem fast. Jacks settle, stands get mispositioned, plastic ramps flex and slide, and lumber shifts as tires climb.

The APEX 48" Lightweight Foam Garage Ramp Kit is built to replace that mess with something engineered and predictable. Wide contact patches, solid core construction, and a grippy surface give you a stable platform to work with from the moment the car rolls up. If you are going to slide under a car you care about, it should sit on something that was designed from day one for that responsibility.

Made For Enthusiasts Who Actually Wrench
APEX did not design this kit as a storage block or a show piece. It was built for people who use their home garage like a mini shop. Drivers who change their own oil, swap wheels, check fasteners before track days, and chase noises they can only find with the car in the air.

Every time you use it, you save the setup time of jacks and stands and gain the confidence of a simple drive-on solution. Park, roll up, chock, and get to work. The more you wrench, the more obvious it becomes why these ramps exist.

Who Is This Product Best For?

• Enthusiasts with performance cars or mild drops who want serious working room without a full car lift
• DIY mechanics who handle regular maintenance, inspections, and light repairs at home
• Detailers and shops that need predictable, repeatable front end lift for underbody cleaning and access
• Owners who want an APEX quality ramp instead of depending on jacks, stands, or bargain plastic wedges

Designed Around Low Cars, Not Just Trucks
Most generic ramps are built for SUVs and pickups. APEX garage ramps are built for cars that actually care about front clearance. Approach angles are dialed in for performance coupes, sport sedans, and mildly to moderately lowered street builds. That means front lips and splitters have a real chance of surviving every drive on, and you do not have to baby the throttle just to climb onto the ramp.

Structural Foam That Feels Rock Solid
Every APEX garage ramp uses a solid structural foam core instead of hollow plastic shells. That core spreads load through the entire ramp, so it feels planted when you roll on and does not sag into a permanent curve over time. On top, a durable textured coating grips both the tire and the floor, keeping the ramp in place on concrete, epoxy, and typical shop surfaces. No rattling steel, no ringing metal, just quiet, stable support.

From Quick Service To Serious Underbody Work
Shorter APEX ramps are perfect for quick jobs like oil changes, inspections, mild exhaust work, and detailing. Longer ramps with 8 to 10 inches of lift give you real underbody access for more involved maintenance and upgrades. You get predictable roll on height for everything from daily maintenance to pre track inspections. For many owners, that makes ramps the first tool they reach for instead of dragging out a jack and stands for every simple job.

Garage Ramp FAQs

How much lift do I actually need in my garage?
For quick fluid changes and inspections, 4 to 6 inches of lift from shorter ramps is usually enough. If you want more comfortable access for exhaust work, suspension checks, or frequent underbody jobs, 8 to 10 inches of lift from longer APEX garage ramps makes a big difference.

Will APEX garage ramps work with lowered cars?
Yes. The range is tuned for low and performance oriented vehicles, with approach angles designed to clear most mildly to moderately lowered setups. Extremely low cars may prefer longer ramps or trailer style ramps first, but most street builds will climb APEX garage ramps without scraping.

Are APEX ramps safer than using a jack and stands?
Ramps and stands each have their place. For many routine jobs, drive on ramps are simpler, faster, and reduce the chance of misplacing a jack point or stand. You still need to follow safe shop practices and use wheel chocks, but many enthusiasts prefer the stability and repeatability of quality ramps for regular maintenance.

Can I use APEX garage ramps on epoxy or decorative floors?
Yes. The textured coating is non marring and designed to grip coated and sealed surfaces without scratching. Just keep the floor reasonably clean and dry before driving on.

How do APEX garage ramps compare to cheap plastic ramps?
Cheap ramps often flex, slide, or crack under load. APEX uses a structural foam core and a bonded outer shell to provide better stability, grip, and long term durability. They are built as serious shop tools, not disposable accessories.

New Race Car Ramps Just Rolled Into Town.
Ultra-lightweight APEX ramps for trailers, lifts, garages and storage. Built for low cars and people who actually wrench.

One Idea. Four Ways To Use It
APEX ramps solve the same problem in different places - on the trailer, in the garage, on the lift and when the car sits for a while.

From The Lift People. For The Ramp Problem.
APEX is born inside the same group that builds BendPak car lifts. That means these ramps were sketched on shop floors, tested under real cars and refined around real frustrations. APEX ramps are not just an accessory. They are part of a system. The missing piece between the floor, the trailer and the lift your car already trusts.

All The Strength. None Of The Struggle.
Steel ramps are strong but heavy. Aluminum is lighter but still a fight. APEX ramps use a solid, lightweight high-density EPS structural foam core that changes the math. The foam core spreads weight through the body instead of concentrating it at thin contact points. The outer skin is a tough, textured coating that locks to the core and grips tires and floors. Don't dread the setup. Grab an APEX ramp, drop it where it belongs and get on with the work.

What's Inside Every APEX Ramp?
APEX ramps are not painted mystery foam. Each one is a composite: a high density expanded polystyrene core locked inside a sprayed polyurea elastomer shell. The chemistry is overbuilt for what you do to ramps in the real world.

Polyurea Coating On The Outside
The outer shell is a two component polyurea elastomer sprayed directly onto the foam. Isocyanate and amine react in milliseconds to form long chains of urea linkages that crosslink into a dense, rubber tough skin. That chemistry gives you high tensile strength, very high elongation and serious abrasion resistance in one layer.

The coating wets into the EPS surface while it cures, so it does not sit on top like paint. It keys into the core and locks on, which is why you can drag APEX ramps across concrete, load on them all weekend and not watch the shell peel away.

• Fast cure time for a seamless shell around the core.
• High elongation and impact resistance for dropped tools and curb hits.
• Micro textured finish that grips tires and typical shop floors.
• Excellent resistance to oil, fuel, coolant and most common shop chemicals.

High Density Expanded Polystyrene On The Inside
The core starts as styrene beads that are pre expanded with steam, then fused under heat and pressure into a solid block. At the densities APEX uses, expanded polystyrene behaves like a structural foam: rigid enough to carry heavy loads, light enough to move with one hand and stable across real temperature swings in trailers and garages.

Closed cell structure means the beads trap gas rather than water. The core does not soak up moisture, does not rust and does not slowly turn to mush if you park on it for long stretches. Compression is distributed through the whole block instead of one thin wall, which is why APEX ramps feel planted when you drive onto them.

• High compressive strength relative to weight for real vehicle loads.
• Closed cell construction that resists water ingress and freeze damage.
• Dimensionally stable across typical shop and trailer temperatures.
• Acts as a damping layer so ramps stay quiet under the car.

Two Materials Working As One.
Put together, the EPS core and polyurea shell give APEX ramps a solid core feel with a tough, grippy surface that holds up to trailers, lifts and low cars that actually get driven.

Accessories/Options

PRE-ORDER
LAUNCH SPECIAL

APEX 36" Lightweight Foam Garage Ramp Kit

OUR PRICE: $246.00

Regular Price: $290.00

Add to Cart

PRE-ORDER
LAUNCH SPECIAL

APEX 60" Lightweight Foam Garage Ramp Kit

OUR PRICE: $467.00

Regular Price: $550.00

Add to Cart

PRE-ORDER
LAUNCH SPECIAL

APEX 72" Lightweight Foam Garage Ramp Kit

OUR PRICE: $616.00

Regular Price: $725.00

Add to Cart