APEX

Leading car lift and vehicle service equipment manufacturer BendPak Inc. announces APEX by BendPak, a new equipment brand designed for those who want top quality, reliability and support at a lower price point. The brand launches today with a family of APEX ramps designed to lift vehicles for service or storage and improve vehicle loading onto four-post lifts and trailers. Over the next several months, BendPak will roll out additional APEX products including two-post lifts, tire changers, wheel balancers, adapters, and more.

One idea. Four ways to use it. APEX ramps solve the same problem in different places - on the trailer, in the garage, on the lift and when the car sits for a while.

And remember, we sell, service and can arrange for installation nationwide.

Limited Time Special Deals - Don't Delay!

PRE-ORDER
LAUNCH SPECIAL

APEX 24" Lightweight Foam Tire-Saver Ramp Kit

APEX 24" Lightweight Foam Tire-Saver Ramp Kit 1.5" Lift / 9° Approach Angle / Set of 4 The APEX 24" Lightweight Foam Tire-Saver Ramp Kit is built to keep your tires round, healthy, and off cold concrete during storage. Each 24 inch ramp has a gentle 9 degree approach and a wide, contoured cradle that supports the tire's natural shape instead of flattening it against the floor. You get a full set of four lightweight ramps, so every wheel is protected. Roll on, park, and know your performance car, classic, truck, or SUV will sit cleaner and come off storage with tires ready to drive.

OUR PRICE: $846.00
Regular Price: ~~$955.00~~

FREE SHIPPING*

APEX Ramp Receivers for Hook-Nose Lift Ramps

APEX Ramp Receivers for Hook-Nose Lift Ramps Fits BendPak 7K and 9K Four Post Lifts, Including 973 Series / Set of 2 APEX Ramp Receivers are required for using APEX hook-nose lift ramps on most BendPak 7K-9K four-post lifts. These heavy-duty steel brackets provide the secure engagement point that allows hook-nose ramps to lock safely into the lift runway. Sold as a pair, they are an essential add-on for proper ramp fitment and safe drive-on operation. For Use With APEX Hook-Nose Foam Four Post Ramps

OUR PRICE: $120.00
Regular Price: ~~$129.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 96" Lightweight Foam Four Post Ramp Kit

APEX 96" Lightweight Foam Four Post Ramp Kit 11" Lift / 6° Approach Angle / Set of 2 The APEX 96" Lightweight Foam 4-Post Ramp Kit is the ultra light, hook nose upgrade made specifically for BendPak HD-973P and HD-973PX lifts. Each 96 inch ramp delivers 11 inches of lift with a shallow 6 degree approach angle that low cars can actually climb without bumper drama. Built from high density structural foam with a rugged textured coating and a reinforced hook nose, these ramps are engineered to drop into the HD-973P / HD-973PX ramp pockets as a direct replacement for the factory steel ramps. Once you switch to APEX, you will not want to wrestle stock ramps again. Does your BendPak four-post lift have ramp receiver brackets? Ramp receiver brackets required for using APEX hook-nose lift ramps on BendPak 7K–9K four-post lifts. Sold as a pair. See Accessories/Options.

OUR PRICE: $1,169.00
Regular Price: ~~$1,375.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 48" Lightweight Foam Four Post Ramp Kit

APEX 48" Lightweight Foam Four Post Ramp Kit 5" Lift / 5.7° Approach Angle / Set of 2 The APEX 48" Lightweight Foam 4 Post Ramp Kit is the ultra convenient, hook nose replacement for the heavy steel or aluminum ramps that came with your four post lift. Each 48 inch ramp delivers 5 inches of lift with a gentle 5.7 degree approach angle that is far friendlier for lower cars and performance vehicles. Designed for BendPak four post lifts and compatible with most lifts that use drop in or hook style ramps, these APEX ramps are so light and easy to move you will never want to wrestle factory ramps again. Does your BendPak four-post lift have ramp receiver brackets? Ramp receiver brackets required for using APEX hook-nose lift ramps on BendPak 7K–9K four-post lifts. Sold as a pair. See Accessories/Options.

OUR PRICE: $303.00
Regular Price: ~~$356.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 72" Lightweight Foam Garage Ramp Kit

APEX 72" Lightweight Foam Garage Ramp Kit 10" Lift / 9.5° Approach Angle / Set of 2 The APEX 72" Lightweight Foam Garage Ramp Kit is for people who want true undercar access without installing a full lift. Each 72 inch ramp delivers 10 inches of stable lift with a 9.5 degree approach angle that performance cars and many lowered setups can still climb with confidence. A solid structural foam core feels rock steady under the tires, while a textured, non marring coating grips floors and tread. Drive on once, chock, and you have serious working height in an ordinary garage.

OUR PRICE: $616.00
Regular Price: ~~$725.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 60" Lightweight Foam Garage Ramp Kit

APEX 60" Lightweight Foam Garage Ramp Kit 8" Lift / 9.5° Approach Angle / Set of 2 The APEX 60" Lightweight Foam Garage Ramp Kit is built for enthusiasts who actually spend time under their cars. Each 60 inch ramp gives you 8 inches of stable lift with a 9.5 degree approach angle that low performance cars can still climb without chewing up front lips and splitters. A solid structural foam core feels planted under the tires, while a rugged textured coating grips both the floor and the tread. Roll up once, set the brake, and you finally have real working room in a normal garage.

OUR PRICE: $467.00
Regular Price: ~~$550.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 48" Lightweight Foam Garage Ramp Kit

APEX 48" Lightweight Foam Garage Ramp Kit 6" Height / 9.5° Approach Angle / Set of 2 The APEX 48" Lightweight Foam Garage Ramp Kit gives low cars serious working room without needing a full lift. Each 48 inch ramp delivers 6 inches of stable lift with a 9.5 degree approach angle tuned for performance cars, mild drops, and factory sport suspensions. A solid structural foam core keeps weight down but feels rock solid under the tires, while a rugged textured coating grips floors and tread. You drive on once, set the brake, and finally have enough space to actually work under the car.

OUR PRICE: $289.00
Regular Price: ~~$340.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 36" Lightweight Foam Garage Ramp Kit

APEX 36" Lightweight Foam Garage Ramp Kit 4" Lift / 9.35° Approach Angle / Set of 2 The APEX 36" Lightweight Foam Garage Ramp Kit is the clean, no nonsense way to get low cars up in the air for real work in a standard garage. Each 36 inch ramp delivers 4 inches of lift with a 9.35 degree approach angle that low splitters and lips can actually clear. The solid structural foam design keeps weight down while staying rock steady under the tires, so you can drive on, chock, and get underneath with far more confidence than plastic wedges or sketchy lumber stacks.

OUR PRICE: $246.00
Regular Price: ~~$290.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 72" Lightweight Foam Trailer Ramp Kit

APEX 72" Lightweight Foam Trailer Ramp Kit 7" Height / 5.5° Approach Angle / Set of 2 The APEX 72" Lightweight Foam Trailer Ramp Kit is built for low cars, long trailers, and people who are done gambling with ground clearance. Each ramp is 72 inches long with a 7 inch rise and a shallow 5.5 degree approach angle that lets serious street builds, track cars, and long overhang coupes roll onto the trailer without scraping. A high density structural foam core and rugged textured coating keep the ramps light to move yet strong under load, while a reinforced UHMW insert embedded into the trailer interface prevents compression and shelf deformation where the ramp meets the door. The result is a long, stable loading solution that keeps your approach geometry consistent every time you haul.

OUR PRICE: $659.00
Regular Price: ~~$775.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 60" Lightweight Foam Trailer Ramp Kit

APEX 60" Lightweight Foam Trailer Ramp Kit 7" Height / 6.6° Approach Angle / Set of 2 The APEX 60" Lightweight Foam Trailer Ramp Kit is built for seriously low cars that need real clearance and a longer, smoother transition onto the trailer. Each ramp is 60 inches long with a 7 inch rise and a gentle 6.6 degree approach angle, ideal for cars with aggressive splitters, extended front lips, or long overhangs. A solid high density structural foam core and durable textured coating keep the ramps lightweight yet strong, while a reinforced UHMW insert embedded into the trailer interface prevents compression and shelf deformation where the ramp rests on the door. The result is a long, stable loading solution that keeps your approach geometry consistent every time you load.

OUR PRICE: $422.00
Regular Price: ~~$496.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 48" Lightweight Foam Trailer Ramp Kit

APEX 48" Lightweight Foam Trailer Ramp Kit 5" Height / 5.9° Approach Angle / Set of 2 The APEX 48" Lightweight Foam Trailer Ramp Kit is built for low cars that need extra clearance and a bit more lift. Each 48 inch ramp raises the trailer interface 5 inches and softens the approach angle to 5.9 degrees so splitters, lips, and long overhangs clear cleanly without scraping. A solid high density EPS core and rugged polyurea coating keep the ramps light in the hand and strong under load, while a reinforced UHMW insert embedded into the shelf interface prevents compression and deformation where the ramp rests on the trailer. The result is a compact, durable loading solution that keeps your approach geometry consistent every time you load.

OUR PRICE: $379.00
Regular Price: ~~$446.00~~

FREE SHIPPING*

PRE-ORDER
LAUNCH SPECIAL

APEX 36" Lightweight Foam Trailer Ramp Kit

APEX 36" Lightweight Foam Trailer Ramp Kit 3.5" Height / 5.4° Approach Angle / Set of 2 The APEX 36" Lightweight Foam Trailer Ramp Kit makes loading low cars onto trailers predictable instead of stressful. Each 36 inch ramp reduces the approach angle to 5.4 degrees, so splitters, side skirts, and long overhangs clear cleanly without stacking lumber or improvising blocks. A high density structural foam core and durable textured coating keep the ramps light to carry yet strong under load, while a reinforced UHMW insert embedded into the shelf area prevents compression and deformation where the ramp rests on the trailer. The result is a compact, professional loading solution that protects both your vehicle and your trailer every time you drive on.

OUR PRICE: $238.00
Regular Price: ~~$280.00~~

FREE SHIPPING*

Show per page

One idea. Four ways to use it. APEX ramps solve the same problem in different places - on the trailer, in the garage, on the lift and when the car sits for a while.

New ultra-lightweight APEX by BendPak ramps are designed to lift low vehicles for service or storage and improve vehicle loading onto four-post lifts and trailers. APEX garage, trailer, four-post lift and tire-saver foam ramps are engineered with exclusive features like reinforced contact points, molded-in handles, advanced coatings and material innovations to deliver superior performance, durability and safety.

APEX garage, trailer, four-post lift and tire-saver foam ramps are engineered with exclusive features like reinforced contact points, molded-in handles, advanced coatings and material innovations to deliver superior performance, durability and safety. At the core of every APEX ramp is high-density expanded polystyrene (EPS), a proprietary material engineered for optimal strength-to-weight performance. Its solid-core design supports thousands of pounds while remaining easy to lift and position. Plus, unlike hollow plastic or welded metal, EPS won’t dent, rust or transfer heat, making it ideal for indoor and outdoor use. Its closed-cell structure resists water, oil and automotive chemicals while naturally absorbing shock and vibration.

Unlike other ramps that rely on bolted or screwed on handles or nylon straps, APEX ramps feature integrated thermoplastic carry handles molded directly into the ramp body. Strategically positioned at each ramp’s balance point, they make the ramps easy to lift, carry and position with just one hand. The handles never loosen, corrode or detach and are built to withstand years of professional use.

Established in 1965, BendPak Inc. is an American-owned global manufacturer of vehicle service equipment and specialty consumer products sold under the trademarked brands BendPak, Ranger, Autostacker, QuickJack, Cool Boss, Grand Prix, APEX, JackPak, MaxJax, and Ergochair. Its collective range of products includes car lifts, parking lifts, EV battery lifts, pipe benders, air compressors, tire changers, wheel balancers, brake lathes, evaporative air coolers, rolling work seats, portable power packs, and other equipment.

One-Stop for Auto Shop Equipment
Think of us as your one-stop location for whatever garage equipment you need. We carry a huge selection of automotive equipment from the leading names in the industry. Our name brand auto shop equipment will give you an edge when handling almost any auto repair or upgrade project. Find out why more and more auto shop owners and home hobbyists are purchasing their garage equipment from ASEdeals.