APEX 72" Lightweight Foam Garage Ramp Kit

Description

APEX 72" Lightweight Foam Garage Ramp Kit
10" Lift / 9.5° Approach Angle / Set of 2

The APEX 72" Lightweight Foam Garage Ramp Kit is for people who want true undercar access without installing a full lift. Each 72 inch ramp delivers 10 inches of stable lift with a 9.5 degree approach angle that performance cars and many lowered setups can still climb with confidence. A solid structural foam core feels rock steady under the tires, while a textured, non marring coating grips floors and tread. Drive on once, chock, and you have serious working height in an ordinary garage.

APEX Garage Ramps For Low And Performance Cars
APEX garage ramps turn a normal garage floor into a place you can actually work. Built from high density structural foam with a textured, non marring coating, these ramps give low and performance cars real lift without sketchy angles or cheap plastic flex. From compact 36 inch ramps for quick oil changes to long 72 inch ramps that get you close to lift like access, every model is tuned around approach angle, stability, and everyday use. You drive on once, set the brake, and finally have room to see, reach, and wrench.

Turn Your Garage Into A Mini Service Bay
If a floor jack and stands are constantly in your way and you are still stuck working inches off the concrete, it is time for something better. The 72" Lightweight Foam Garage Ramp Kit from APEX is built to transform a normal garage into a space that actually feels like a small service bay. With 10 inches of lift and a long, low approach, these ramps give you the kind of access that usually feels reserved for shops with permanent lifts.

Roll the car forward and the chassis climbs in a smooth, controlled arc. No sketchy lumber stacks, no balancing acts on flimsy plastic, and no guessing if the stands are exactly where they should be. Just a pair of purpose built ramps that raise the car high enough to actually work under it and keep it there with solid, predictable support.

10 Inches Of Lift With A Controlled Approach
Most ramps that offer real height are built with trucks in mind. The angle is steep, the run is short, and once you lower a car you are basically locked out. APEX tuned the 72" Lightweight Foam Garage Ramp Kit around a different reality. Performance coupes, sport sedans, and street cars with reasonable drops need both height and a friendly approach.

The 72 inch length gives the chassis time to rotate gradually as it climbs, which keeps the nose away from the ramp edge. The 9.5 degree approach angle is low car aware, so front lips and splitters have a realistic chance of surviving every drive on. Combine that with a full 10 inches of lift and you get the best underbody access in the APEX garage ramp lineup without sacrificing drivability or sanity.

APEX Structural Foam That Feels Like Serious Equipment
At the core of every APEX garage ramp is a high density structural foam body. This is not hollow plastic. It is a solid, closed cell core that spreads load across the entire ramp footprint instead of concentrating it at thin shells or contact points.

Under tire, you feel the difference immediately. The ramp stays quiet, planted, and predictable. No flex, no sudden pops, no sense that you are perched on something temporary. Over time the structural foam resists permanent compression, so the lift height you buy is the lift height you keep. For owners who wrench often and keep cars long term, that matters more than marketing numbers.

Tough, Textured Coating For Real Garage Life
APEX encapsulates the structural foam core in a rugged, textured coating that is built for real use. It shields the ramp from scuffs, impacts, and the usual cocktail of fluids that hit garage floors. At the same time it delivers a micro textured surface that grips both tires and common flooring surfaces.

On bare concrete, epoxy, sealed floors, and typical shop surfaces, the ramps are designed to stay put. You are not chasing them across the floor, not throwing mats under them, and not hoping that they do not scoot forward when a heavy front end starts climbing. You drop them where you want them and they get on with the job.

Long Ramp, Manageable To Move
A 72 inch ramp sounds massive until you pick one up. The structural foam construction keeps each piece light enough to move and position by yourself. Integrated carry zones are molded into the profile so you can grab, lift, and walk them into place without wrestling steel.

When you are done, the ramps stand upright against a wall, slide under shelving, or park along the side of the garage. You get full length geometry without sacrificing the whole bay to storage. That balance is what makes APEX ramps something you use every week instead of once in a while.

A Better Answer Than Jacks, Stands, And Scrap Wood
Jacks and stands will always have their place, but they are slow, fussy, and easy to get wrong when you are tired or in a hurry. Scrap wood works until it shifts or splits at the worst possible time. Cheap ramps flex, slide, and sometimes crack without much warning. None of that is what you want between you and the underside of a car you care about.

The 72" Lightweight Foam Garage Ramp Kit from APEX replaces that collection of workarounds with a single, engineered solution. Wide contact patches, solid core structure, long footprint, and a gripping surface come together to give you the one thing that really matters when you are under the car: confidence in what it is sitting on.

Built For Serious DIY And Weekend Pit Crews
APEX had real enthusiasts in mind when this kit was designed. People who track their cars, daily drive performance builds, or simply do not trust anyone else to touch their suspension, exhaust, or fluids. If your garage doubles as a pit lane, this is the ramp setup that makes it workable.

Oil changes, gearbox and diff services, exhaust installs, undertray removal, leak checks, pre track inspections, and countless small jobs become easier and faster when you can just drive up and get to work. Once you get used to having 10 inches of reliable lift, it is hard to go back to wrestling with a jack in the dark corner of the garage.

Who Is This Product Best For?

• Serious DIY enthusiasts who regularly perform undercar maintenance and upgrades
• Track day and club racing drivers who prep and inspect cars between events
• Performance shops and detailers wanting repeatable drive on height for inspections and cleaning
• Owners of sport sedans, coupes, and mild to moderately lowered cars who want lift like access in a home garage
• Anyone who wants an APEX level ramp that makes a regular garage feel like a real working bay

Designed Around Low Cars, Not Just Trucks
Most generic ramps are built for SUVs and pickups. APEX garage ramps are built for cars that actually care about front clearance. Approach angles are dialed in for performance coupes, sport sedans, and mildly to moderately lowered street builds. That means front lips and splitters have a real chance of surviving every drive on, and you do not have to baby the throttle just to climb onto the ramp.

Structural Foam That Feels Rock Solid
Every APEX garage ramp uses a solid structural foam core instead of hollow plastic shells. That core spreads load through the entire ramp, so it feels planted when you roll on and does not sag into a permanent curve over time. On top, a durable textured coating grips both the tire and the floor, keeping the ramp in place on concrete, epoxy, and typical shop surfaces. No rattling steel, no ringing metal, just quiet, stable support.

From Quick Service To Serious Underbody Work
Shorter APEX ramps are perfect for quick jobs like oil changes, inspections, mild exhaust work, and detailing. Longer ramps with 8 to 10 inches of lift give you real underbody access for more involved maintenance and upgrades. You get predictable roll on height for everything from daily maintenance to pre track inspections. For many owners, that makes ramps the first tool they reach for instead of dragging out a jack and stands for every simple job.

Garage Ramp FAQs

How much lift do I actually need in my garage?
For quick fluid changes and inspections, 4 to 6 inches of lift from shorter ramps is usually enough. If you want more comfortable access for exhaust work, suspension checks, or frequent underbody jobs, 8 to 10 inches of lift from longer APEX garage ramps makes a big difference.

Will APEX garage ramps work with lowered cars?
Yes. The range is tuned for low and performance oriented vehicles, with approach angles designed to clear most mildly to moderately lowered setups. Extremely low cars may prefer longer ramps or trailer style ramps first, but most street builds will climb APEX garage ramps without scraping.

Are APEX ramps safer than using a jack and stands?
Ramps and stands each have their place. For many routine jobs, drive on ramps are simpler, faster, and reduce the chance of misplacing a jack point or stand. You still need to follow safe shop practices and use wheel chocks, but many enthusiasts prefer the stability and repeatability of quality ramps for regular maintenance.

Can I use APEX garage ramps on epoxy or decorative floors?
Yes. The textured coating is non marring and designed to grip coated and sealed surfaces without scratching. Just keep the floor reasonably clean and dry before driving on.

How do APEX garage ramps compare to cheap plastic ramps?
Cheap ramps often flex, slide, or crack under load. APEX uses a structural foam core and a bonded outer shell to provide better stability, grip, and long term durability. They are built as serious shop tools, not disposable accessories.

New Race Car Ramps Just Rolled Into Town.
Ultra-lightweight APEX ramps for trailers, lifts, garages and storage. Built for low cars and people who actually wrench.

One Idea. Four Ways To Use It
APEX ramps solve the same problem in different places - on the trailer, in the garage, on the lift and when the car sits for a while.

From The Lift People. For The Ramp Problem.
APEX is born inside the same group that builds BendPak car lifts. That means these ramps were sketched on shop floors, tested under real cars and refined around real frustrations. APEX ramps are not just an accessory. They are part of a system. The missing piece between the floor, the trailer and the lift your car already trusts.

All The Strength. None Of The Struggle.
Steel ramps are strong but heavy. Aluminum is lighter but still a fight. APEX ramps use a solid, lightweight high-density EPS structural foam core that changes the math. The foam core spreads weight through the body instead of concentrating it at thin contact points. The outer skin is a tough, textured coating that locks to the core and grips tires and floors. Don't dread the setup. Grab an APEX ramp, drop it where it belongs and get on with the work.

What's Inside Every APEX Ramp?
APEX ramps are not painted mystery foam. Each one is a composite: a high density expanded polystyrene core locked inside a sprayed polyurea elastomer shell. The chemistry is overbuilt for what you do to ramps in the real world.

Polyurea Coating On The Outside
The outer shell is a two component polyurea elastomer sprayed directly onto the foam. Isocyanate and amine react in milliseconds to form long chains of urea linkages that crosslink into a dense, rubber tough skin. That chemistry gives you high tensile strength, very high elongation and serious abrasion resistance in one layer.

The coating wets into the EPS surface while it cures, so it does not sit on top like paint. It keys into the core and locks on, which is why you can drag APEX ramps across concrete, load on them all weekend and not watch the shell peel away.

• Fast cure time for a seamless shell around the core.
• High elongation and impact resistance for dropped tools and curb hits.
• Micro textured finish that grips tires and typical shop floors.
• Excellent resistance to oil, fuel, coolant and most common shop chemicals.

High Density Expanded Polystyrene On The Inside
The core starts as styrene beads that are pre expanded with steam, then fused under heat and pressure into a solid block. At the densities APEX uses, expanded polystyrene behaves like a structural foam: rigid enough to carry heavy loads, light enough to move with one hand and stable across real temperature swings in trailers and garages.

Closed cell structure means the beads trap gas rather than water. The core does not soak up moisture, does not rust and does not slowly turn to mush if you park on it for long stretches. Compression is distributed through the whole block instead of one thin wall, which is why APEX ramps feel planted when you drive onto them.

• High compressive strength relative to weight for real vehicle loads.
• Closed cell construction that resists water ingress and freeze damage.
• Dimensionally stable across typical shop and trailer temperatures.
• Acts as a damping layer so ramps stay quiet under the car.

Two Materials Working As One.
Put together, the EPS core and polyurea shell give APEX ramps a solid core feel with a tough, grippy surface that holds up to trailers, lifts and low cars that actually get driven.

Accessories/Options

PRE-ORDER
LAUNCH SPECIAL

APEX 36" Lightweight Foam Garage Ramp Kit

OUR PRICE: $246.00

Regular Price: $290.00

Add to Cart

PRE-ORDER
LAUNCH SPECIAL

APEX 48" Lightweight Foam Garage Ramp Kit

OUR PRICE: $289.00

Regular Price: $340.00

Add to Cart

PRE-ORDER
LAUNCH SPECIAL

APEX 60" Lightweight Foam Garage Ramp Kit

OUR PRICE: $467.00

Regular Price: $550.00

Add to Cart